Acetal Plastic for CNC Machining
Versatile thermoplastic well-suited for machining projects.
What is Acetal?
Acetal (polyoxymethylene or POM) is a strong, stiff, wear-resistant thermoplastic with excellent dimensional stability. It is also known by the trade name Delrin.
We offer four formulations of acetal plastics via our CNC machining service:
- Acetal 20% Glass-filled/Delrin 570
- POM (acetal copolymer)
- POM-H (acetal homopolymer)
- POM (acetal static dissipative)
Key Benefits of Acetal
All forms of acetal have a lot going for them for machined parts. One of its most important features is its machinability. Endmills cut through it like butter, and those cuts tend to be clean and smooth. At the same time, precision parts can benefit from its high dimensional stability and tolerance for temperature and weight. Related to that is acetal’s strength and stiffness, which help it tolerate heavy loads. Acetal is also suitable for high-moisture environments as it is unlikely to swell in those conditions. Last but not least, that toughness means it’s also suitable for applications that experience friction. In some situations, it can even replace heavier metal parts, allowing for light-weighting.
Applications for Acetal Plastics
- Bearings
- Bushings
- Fasteners
- Gears
- High-moisture environments, such as washers, faucets, and more
- Insulators for electrical components
Compare Material Properties of Molded Acetal
| Ultimate Tensile Strength | Impact Strength | Heat Deflection | More Information | |
|---|---|---|---|---|
| Acetal 20% GF/Delrin 570 | 8.5 KSI (58.6 MPa) | 152 J/m | 329° F (165° C) | Data Sheet |
| POM | 8.8 KSI (60.7 MPa) | 53 J/m | 316° F (158° C) | Data Sheet |
| POM-H | 11.1 KSI (76.5 MPa) | 80 J/m | 329° F (336° C) | Data Sheet |
| POM (static dissipative) | 6.6 KSI (45.5 MPa) | 101 J/m | 190° F (88° C) | Data Sheet |
Additional Attributes of Acetal
| Acetal 20% GF/Delrin 570 | POM (copolymer) | POM-H (homopolymer) | POM (static dissipative) | |
|---|---|---|---|---|
| Antistatic | X | |||
| Chemical Resistance | X | |||
| Creep Resistance | X | |||
| Dimensional Stability | X | |||
| FDA-approved | X (in black) | X (in natural) | ||
| Low Friction | X | |||
| Moisture Resistance | X | |||
| Stiffness | X | |||
| Strength | X | X | ||
| Temperature Resistance | X | |||
| Wear Resistance | X |
The Acetal, POM, Delrin Plastics Family
The four types of acetal we stock are all semi-crystalline thermoplastics. Delrin 570 differs from the others because it is 20% glass-filled to provide additional strength, stiffness, creep resistance, and dimensional stability. POM comes in two structural varieties, homopolymer and copolymer. The essential difference between these two is in the chemical structure, with the homopolymer using a chain of the same monomer (a carbon-based molecule), and the copolymer using multiple kinds of monomers to form the chain. The static dissipative version of POM is also a copolymer and a good choice for when you want to avoid issues with static discharge, such as near sensitive electronics where one zap from your finger can destroy a circuit board.
Related Resources
Homopolymers vs. Copolymers. Chemistry of Plastic Parts
Hey! Who's a fan of organic chemistry? OK, you may not have liked studying it, but without those chains of carbon-based molecules life would be rough. So here at Konlida we're all about paying our respects to those special groups of bonded atoms called polymers.
Acetal Injection Molding
Acetal or Polyoxymethylene (POM) is a high-performance thermoplastic well-suited for a wide range of applications due to its wear characteristics.
Delrin Material Properties Offer Strong, Versatile Plastic Alternative to Metal
Consider Delrin as an excellent plastic replacement for metal because of its strength, versatility.